Acrylic resins:
Acrylic resins create a film-forming membrane on the surface of the substrate. Available in both water-based and solvent-based formulations, they are affordable and generally easy to apply.
They are well known for increasing perceived visual improvement (sometimes described as a “wet look”) and can provide good UV protection for colour substrates.
Despite being the smoothest and least durable of the major sealer categories, price and convenience make acrylic resins a popular choice for decorative concrete such as stamped concrete and exposed aggregate.
Acrylic resins are also commonly used as curing agents for new concrete, and many meet ASTM C309.
Epoxy / urethane systems
Epoxy / urethane systems are also film-forming membranes.
They share many of the same characteristics as acrylics, but performance levels and life are higher and proportionately more expensive due to more complex installation requirements.
Epoxy / urethane systems are generally applied only to fully cured existing concrete, although certain epoxy products may meet ASTM C309.
Silane concrete sealer
Silane is the smallest molecular compound of commonly available penetrating sealers.
Chemically, silane forms a covalent bond within porous masonry that coagulates surface pores.
Silane is known to be hydrophobic and oleophobic and will only wear if the concrete surface is worn. Known for its low viscosity, silane is often used to seal dense concrete, such as parking platforms, concrete facades and dense brick.
Silane is generally applied only to fully cured existing concrete.
Silicate concrete sealer
Silicates are another small molecular compound ranging from premium lithium silicates to more economic sodium silicates.
Chemically, silicates form calcium hydrate and silicate crystals that can densify concrete surfaces and burnish/polish to develop a glossy finish.
Silicates are known to be hydrophobic and oleophobic and will only wear if the concrete surface is worn. Known for their crystallization, silicates are often used to polish concrete floors at large industrial or commercial facilities.
Silicates can be applied to new and existing concrete, although they do not meet ASTM C309 as a curing agent.
Siliconate concrete sealers
Siliconates are molecular compounds of moderate size. Chemically, siliconates form a repellent cross-linking membrane barrier within the surface of porous concrete and other masonry.
Siliconates are known to be hydrophobic and oleophobic and will only wear if the concrete surface is worn.
Known for their extreme water and stain repellency, siliconates are often used to seal exterior concrete such as roads and driveways, sloping walls, porous brick and porous stone.
Siliconates and organic siliconates have also proven effectiveness as curing agents for new concrete and certain products can meet ASTM C309.
Siloxane concrete sealer
Siloxane is the largest molecular compound of commonly available penetrating sealers.
Although not highly reactive, siloxane chemically forms a bond within porous masonry that coagulates surface pores.
Siloxane is known to be hydrophobic. Known for its large molecular structure, siloxane is often used to seal exterior concrete, porous concrete blocks and porous bricks.
Siloxane is generally applied only to fully cured existing concrete.
In short, all major concrete sealer chemistries can have valuable and practical applications.
Topical sealers generally require higher application and maintenance standards, but the decorative appeal and their stains and chemical resistance can make them a superior choice for many applications.
Penetrating sealers must be combined with the porosity of the substrate for low maintenance water repellency and long lasting freeze/thaw protection.